Wake on LAN/WLAN
Table 8. POST Behavior
Fn Key Emulation
Table 9. Virtualization Support
This option allows the computer to power up from the off state when triggered by a
special LAN signal. Wake-up from the Standby state is unaffected by this setting and
must be enabled in the operating system. This feature only works when the computer
is connected to AC power supply.
Disabled - Does not allow the system to power on by special LAN signals
when it receives a wake-up signal from the LAN or wireless LAN. (Default
LAN Only - Allows the system to be powered on by special LAN signals.
LAN or WLAN
Allows you to block the computer from entering into the sleep state. Option is disabled
Block Sleep (S3)
Allows you to activate the adapter warning messages when certain power adapters
are used. The option is enabled by default.
Enable Adapter Warnings
Allows you to define how the computer handles the mouse and touchpad input. The
Touchpad/PS-2 Mouse (Default Setting)
Allows you to match the <Scroll Lock> key feature of PS-2 keyboard with the <Fn> key
feature in an internal keyboard. The option is enabled by default.
Enable Fn Key Emulation
Allows you to speed up the boot processes. The options are:
Thorough (Default Setting)
This option specifies whether a Virtual Machine Monitor (VMM) can utilize the
additional hardware capabilities provided by Intel Virtualization technology.
Enable Intel Virtualization Technology - Default Setting.