Advanced Boot Options
Table 2. System Configuration
USB Storage Device
You can also choose the Boot List option. The
Legacy (Default Setting)
Allows you to enable the Legacy Option ROMs
during the UEFI boot mode.
Allows you to set the date and time.
Allows you to configure the integrated
network controller. The options are:
Enabled w/PXE (Default Setting)
Allows you to configure the internal SATA
hard-drive controller. The options are:
RAID On (Default Setting)
NOTE: SATA is configured to support
Allows you to configure the SATA drives on
board. The options are:
Default Setting: All drives are enabled.
This field controls if the hard drive errors for
the integrated drives are reported during
system startup. This technology is part of the
SMART (Self Monitoring Analysis and
Reporting Technology) specification.
Enable SMART Reporting - This option
is disabled by default.
Allows you to define the USB configuration.
The options are: