Environment Setting; Configuring The Hostname File; Hostname Definition - Fujitsu Solaris PCI GigabitEthernet 3.0 User Manual

Pci gigabitethernet 3.0 update1 for solaris operating system
Table of Contents

Advertisement

3.2 Environment Setting

This section explains how to edit the necessary file to configure the operating environment
of the FUJITSU PCI GigabitEthernet interface.
In TCP/IP (IPv4 or IPv6) protocol, edit the following information must be setup.
● Configuring the Hostname file
● Hostname Definition
● Netmask Value Definition

3.2.1 Configuring the Hostname File

1. To use the GigabitEthernet interface as an IPv4 interface:
Allocate an IP address or hostname for the fjgi driver by editing the
/etc/hostname.fjgi* file (where * is a numerical value). About netmask value, please
see "
Example /etc/hostname.fjgi* file:
Define a unique hostname:
giga-v4
Or define the IP address:
192.168.150.1
Note 1: Please put a decimal number (instance number) into *.
See section "
information about instance number.
Note 2: See section "
defining the hostname.
Note 3: Please put in neither a blank nor a empty line behind an IP address. If a
blank or a empty line enter, it will not be activated at the time of main part
equipment starting.
2. To use the GigabitEthernet interface as an IPv6 interface:
Allocate an IP address and prefix for the fjgi driver by editing the
/etc/hostname6.fjgi* file (where * is a numerical value).
Example /etc/hostname6.fjgi* file:
Define a unique hostname:
addif giga-v6/120 up
Note: See section "
defining the hostname.
3. To use the GigabitEthernet interface as a VLAN interface:
See section "
name, follow steps 1 or 2 above.

3.2.2 Hostname Definition

Define an IP address with a unique hostname.
1. To use the GigabitEthernet interface as an IPv4 interface:
Add the IPv4 address and hostname to the /etc/hosts file.
3.2.3 Netmask Value Definition
3.4 Discernment Of the GigabitEthernet Interface
3.2.2 Hostname Definition
3.2.2 Hostname Definition
3.6.2 How to create the VLAN interface
".
" for detailed information about
" for detailed information about
", and after defining the VLAN
3.2 Environment Setting
" for detailed
23

Advertisement

Table of Contents
loading

Table of Contents