Replacing the I/O Board
1 Follow the instructions in "Before You Begin" on page 9.
2 Align the connectors on the I/O board into the slots on the computer base.
3 Replace the two screws that secure the I/O board to the computer base.
4 Replace the hinge cover (see "Replacing the Hinge Cover" on page 71).
5 Replace the display assembly (see "Replacing the Display Assembly" on
6 Replace the Mini-Card(s) (see "Replacing the Mini-Card(s)" on page 47).
7 Follow the instructions from step 7 to step 20 in "Replacing the System
Board" on page 81.
stray screws remain inside the computer. Failure to do so may result in damage to
Before turning on the computer, replace all screws and ensure that no