Table of Contents
Advertisement
Back to Contents Page
Optical Drive
Dell™ Inspiron™ 1210 Service Manual
Removing the Optical Drive
Replacing the Optical Drive
CAUTION:
Before performing the following procedures, follow the safety instructions shipped with your computer.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such
as the back panel) on the computer.
Removing the Optical Drive
1. Follow the procedures in
Before You
2. Remove the display assembly (see
3. Remove the keyboard (see
4. Remove the palm rest (see
5. Remove the four M2 x 3-mm screws that secure the optical drive to the computer base.
1
M2 x 3-mm screws (4)
6. Lift the optical drive out of the computer base.
7. Pull the connector away from the back of the optical drive.
Replacing the Optical Drive
1. Attach the connector to the back of the optical drive.
2. Replace the optical drive and the four M2 x 3-mm screws that secure the optical drive to the computer base.
3. Replace the palm rest (see
4. Replace the keyboard (see
5. Replace the display assembly (see
6. Slide the battery into the battery bay, until it clicks into place.
Begin.
Replacing the
Display).
Replacing the
Keyboard).
Replacing the Palm
Rest).
2
optical drive
Replacing the Palm
Rest).
Replacing the
Keyboard).
Replacing the
Display).
Advertisement
Table of Contents
