Table of Contents
Advertisement
Back to Contents Page
Power Button Board
Dell Inspiron 1122 Service Manual
Removing the Power Button Board
Replacing the Power Button Board
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell is
not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION:
To help prevent damage to the system board, remove the main battery (see
computer.
Removing the Power Button Board
1. Follow the instructions in
Before You
2. Remove the battery (see
Removing the
3. Remove the keyboard (see
4. Follow the instructions from
5. Remove the palm rest (see
6. Turn the palm rest over and remove the screw that secures the power button board to the palm rest.
7. Lift the power button board off the palm rest.
1
power button board
3
back of the palm rest
Replacing the Power Button Board
1. Follow the instructions in
Before You
2. Align the screw hole on the power button board with the screw hole on the palm rest.
3. Replace the screw that secures the power button board to the palm rest.
4. Replace the palm rest (see
5. Follow the instructions from
Begin.
Battery).
Removing the
Keyboard).
step 4
to
step 6
in
Removing the Hard
Removing the Palm
Rest).
2
screw
Begin.
Replacing the Palm
Rest).
step 5
to
step 7
in
Replacing the Hard
Removing the
Drive.
Drive.
Battery) before working inside the
Advertisement
Table of Contents
