Table of Contents
Advertisement
2.2
Connection to Main Unit
As shown in Figure 2.2-1 "IF Cable Connection", use an IF cable to connect the parallel
communications adapter to the main unit (sold separately).
Connection to Main Unit
As shown in Figure 2.2-1 "IF Cable Connection", use an IF cable to connect the parallel
communications adapter to the main unit (sold separately).
For details of connecting the IF cable to the main unit, refer to the 2140 Main Unit MB2141
Emulator User's Manual.
Notes
When connecting the parallel communications adapter to the main unit (sold separately), keep
the following points in mind:
•
Turn off the power before connecting or removing a cable. Attempting to connect or remove
a cable while the power is turned on may cause a malfunction.
•
To remove a cable, do not pull the cable itself; grasp and pull the connector. Pulling the
cable itself may cause a conductor inside the cable to break.
2.2 Connection to Main Unit
13
Advertisement
Table of Contents
