Table of Contents
Advertisement
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT
1.2
Parallel Communications Adapter Specifications
Table 1.2-1 "Parallel Communications Adapter Specifications" lists the specifications
of the parallel communications adapter.
Parallel Communications Adapter Specifications
Table 1.2-1 "Parallel Communications Adapter Specifications" lists the specifications of the
parallel communications adapter.
Table 1.2-1 Parallel Communications Adapter Specifications
Name
Model
Power supply
Operating
temperature
Operating humidity
Dimensions
Weight
*1: Power is supplied from the main unit.
*2: Not including projections.
Parallel Communications Specifications
The parallel communications format conforms to the Centronics interface.
An Amphenol 36P connector is used as the parallel communications connector.
The electrical characteristics of the I/O signal lines are described in Section 1.2.1 "Electrical
Characteristics of I/O Signal Lines"
4
Item
Parallel communications adaptor
MB2142-03
Voltage: +5 V plus or minus 5% Current: 1A (max.)
0 to +55 degrees Celsius
30% to 80% (non-condensing)
120mm (W) x 90mm (D) x 26mm (H)
200g approx.
Contents
*2
*1
Advertisement
Table of Contents
