4.
Insert the wireless receiver into a USB port on the computer.
Figure 2-7
5.
Press and hold the Connect button on the wireless receiver for five seconds until the blue activity
LED begins blinking.
NOTE:
mouse with the wireless receiver.
6.
Press and release the Connect button on the bottom of the mouse. The blue activity LED from
the wireless receiver turns off when synchronization is complete.
NOTE:
of the wireless receiver and the mouse will be broken. Turn the mouse off, then on again to
restore the synchronization.
NOTE:
If the procedure does not work, remove and then reinsert the wireless keyboard and mouse
receiver from the back of the computer and then synchronize the keyboard and mouse again. If
synchronization still does not work, remove and replace the batteries.
16
Chapter 2 Hardware repair and upgrade
Installing the wireless receiver
When the blue activity LED begins blinking, you have 30 seconds to synchronize the
If the Connect button on the bottom of the mouse is pressed again, the synchronization