Replacing The Front Bezel - HP EliteDesk 800 Hardware Reference Manual

●
To remove a slim optical drive bezel blank, press inward on the retaining tabs that hold the
bezel blank in place (1) then pull the bezel blank from the front bezel (2).
NOTE:
you can install an optional bezel trim piece (available from HP) that surrounds the front of
the slim optical drive.

Replacing the front bezel

Insert the three hooks on the bottom side of the bezel into the rectangular holes on the chassis (1)
then rotate the top side of the bezel onto the chassis (2) and snap it into place.
ENWW
After removing the slim optical drive bezel blank and installing a slim optical drive,
Replacing the front bezel 19