Assemble Engine Module - Acer K130 Service Manual

2-9 Assemble Engine
module
1. Place DMD rubber and DMD chip to
engine module.
2. place DMD board, DMD board rubber
and heat sink to engine module.
NOTE: Circuit boards > 10 cm² has been
highlighted with the yellow rectangle
as above image shows. Please
detach the Circuit boards and follow
local regulations for disposal.
3.Screw 4 screws to assemble heat sink to
Engine module (as red circle)
Engine module
DMD chip
DMD board
DMD heat sink
K130
DMD sponge
DMD board rubber
Confidential 2-12