Gigabyte GA-970A-D3P User Manual page 56

View Drive Assignments
The View Drive Assignments option in the Main Menu displays whether the attached hard drives are assigned
to a disk array or are unassigned. Under the Assignment column, drives are labeled with their assigned disk
array or shown as Free if unassigned.
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
Port:ID Drive Model
01:00 WDC WD800JD-22LSA0
[S.M.A.R.T.]
Extent 1
02:00 WDC WD800JD-22LSA0
[S.M.A.R.T.]
Extent 1
[h] Up [i] Down [PaUp/PaDn] Switch Page [Ctrl+H] Secure Erase
[ESC] Exit
Delete an Array
The Delete Array menu option allows for deletion of disk array assignments.
Deleting an existing disk array could result in loss of data. Record all array information including the
array type, the disk members, and stripe block size in case you wish to undo a deletion.
1. To delete an array, press <3> in the Main Menu to enter the Delete LD Menu. Then highlight the array you
wish to delete and press the <Delete> key or the <Alt>+<D> keys.
2. The View LD Definition Menu will appear (as shown in Figure 10) showing which drives are assigned to
this array. Press <Ctrl>+<Y> if you are sure to delete the array or other keys to abort.
3. When the array is deleted, the screen will return to Delete LD Menu. Press <Esc>to return to Main Menu.
Option ROM Utility (c) 2011 Advanced Micro Devices, Inc.
LD No LD Name
LD 1 GBT
Stripe Block
Read Policy
Port:ID Drive Model
01:00 WDC WD800JD-22LSA0
02:00 WDC WD800JD-22LSA0
Configuring SATA Hard Drive(s)
[ View Drives Assignments ]
Capabilities Capacity (GB)
SATA 3G 79.89
Health
79.82
SATA 3G 80.2
Health
[ Keys Available ]
Figure 9
[ View LD Definition Menu ]
64 KB
Read Ahead
[ Drives Assignments ]
Capabilities
SATA 3G
SATA 3G
Press Ctrl-Y to delete the data in the disk!
or press any other key to abort...
[ Keys Available
[ Keys Available
Figure 10
- 56 -
Assignment
LD 1-1
80.02
RAID Mode Drv Capacity(GB)
RAID 0 2
Sector Size 512 B
Write Policy WriteBack
Capacity (GB)
79.89
80.02
]
]
LD 1-2
80