Gigabyte GA-970A-D3P User Manual page 36

& CPU core Control
(Note 1)
Allows you to determine whether to manually enable/disable CPU cores. Automatic mode allows the BIOS
to enable all CPU cores (number of cores available depends on the CPU being used). (Default: Automatic
mode)
& Core C6 State
(Note 1)
Allows you to determine whether to let the CPU enter C6 mode in system halt state. When enabled, the
CPU core frequency will be reduced during system halt state to decrease power consumption. The C6
state is a more enhanced power-saving state than C1. (Default: Enabled)
& HPC Mode
(Note 1)
Allows you to determine whether to enable High Performance Computing (HPC) mode for the CPU. Enabled
prevents the CPU frequency from being lowered during system halt state. (Default: Disabled)
& APM (AMD Application Power Management)
Dynamically monitors the power consumption of the CPU cores and automatically
Enabled
optimizes the CPU to its best performance level. (Default)
Disables this function.
Disabled
& Extreme Memory Profile (X.M.P.)
Allows the BIOS to read the SPD data on XMP memory module(s) to enhance memory performance when
enabled.
Disabled Disables this function. (Default)
Uses Profile 1 settings.
Profile1
Uses Profile 2 settings.
(Note 2)
Profile2
& System Memory Multiplier
Allows you to set the system memory multiplier. Auto sets memory multiplier according to memory SPD
data. (Default: Auto)
& Memory Frequency (MHz)
This value is automatically adjusted according to the BCLK Clock Control and System Memory Multiplier
settings.
(Note 1) This item is present only when you install a CPU that supports this feature.
(Note 2) This item is present only when you install a memory module that supports this feature.
BIOS Setup
(Note 1)
(Note 2)
- 36 -