Table of Contents
Advertisement
AllShare Cast Hub - Troubleshooting Connections
•
If this is the first time you are connecting your device to a hub
and the connection fails:
• Press the RESET button for 1 second until it turns solid BLUE.
• Quickly tap the dongle name from within your device's AllShare cast
screen.
Note: This process is similar to initially pairing a Bluetooth device.
•
If you have already successfully paired another device and you are trying
to connect another device:
• Only one device can be paired and in use at a time with the hub.
• From the previously connected device's AllShare Cast screen, tap the
connection and select End connection.
• If you can't find the previous device:
–
Press and hold the RESET button (on the back of the Hub),
for about FOUR seconds until the LED begins to blink RED.
–
Access your new device's AllShare Cast screen and rescan for the existing
hub/dongle.
–
Press the RESET button on the hub for ONE second until the LED turns
BLUE.
–
Tap the entry from your device's AllShare Cast screen and confirm
connection.
Multimedia
270
Advertisement
Table of Contents
