Wi-Fi Direct - Samsung SCH-R970 User Manual

Scanning and Connecting to a Wi-Fi Network
1. Turn Wi-Fi on (see "Turning Wi-Fi On" on page 126).
Your phone scans for available hotspots and pops-up a
list of any it finds.
2. To connect to a hotspot, touch it on the pop-up list.
• If the Wi-Fi network is open, you will be automatically
connected.
• If the Wi-Fi network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch
Wi-Fi. The Wi-Fi options screen appears. (For more
information, refer to "Accessing Settings" on page
139.)
2. Touch Wi-Fi
3. Touch Add Wi-Fi network, then enter the following
values:
• Network SSID: Enter the name of the WAP (Wireless Access
Point).
• Security: Select the type of security used by the WAP.
• Password: If the WAP is secured, enter the password or key.
Menu Settings
to turn on Wi-Fi.

Wi-Fi Direct

Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Establishing Wi-Fi Direct Connections
1. From the Home screen, touch
Wi-Fi Wi-Fi Direct.
The Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices.
2. To connect to a single Wi-Fi Direct device, touch its
name in the list.
3. To connect to multiple Wi-Fi Direct devices, touch
Multi-connect, next touch Select all or individual
devices, then touch Done.
Menu Settings
Connections 127