8
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Insert the mSATA card connector at a 45-degree angle into the system- board
connector.
2
Press the other end of the mSATA card down into the slot on the system board and
replace the screw that secures the mSATA card to the system-board connector.
Postrequisites
1
Replace the base cover. See "Replacing the Base Cover" on page 15.
2
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
3
Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the mSATA Card
Before working inside your computer, read the safety
Replacing the mSATA Card
17
|