10. Replace the video card(s) (see
11. Replace the video-card heat-sink(s) (see
12. Replace the Bluetooth card (see
13. Replace the palm-rest assembly (see
14. Replace the display assembly (see
15. Replace the macro keyboard (see
16. Replace the keyboard (see
17. Replace the center control cover (see
18. Connect the processor heat-sink fan cable to the connector in the system board (see
19. Connect the video card heat-sink fan cable to the connector in the system board (see
20. Connect the coin-cell battery cable to the connector in the system board (see
21. Replace the hard drive(s) (see
22. Replace the base cover (see
23. Replace the battery pack (see
24. Replace any cards or blank that you removed from the Media-Card Reader.
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
25. Turn on the computer.
NOTE:
After you have replaced the system board, enter the computer Service Tag into the BIOS of the replacement system board.
26. Enter the service tag (see
Entering the Service Tag in the
Entering the Service Tag in the BIOS
1. Ensure that the AC adapter is plugged in and that the main battery is installed properly.
2. Turn on the computer.
3. Press <F2> during POST to enter the system setup program.
4. Navigate to the Security tab and enter the service tag in the Set Service Tag field.
Back to Contents Page
Replacing the Video
Card(s)).
Replacing the Video-Card Heat-
Replacing the Bluetooth
Card).
Replacing the Palm
Rest).
Replacing the Display
Assembly).
Replacing the Macro
Keyboard).
Replacing the
Keyboard).
Replacing the Center Control
Replacing the Hard
Drive(s)).
Replacing the Base
Cover).
Replacing the Battery
Pack).
BIOS).
Sink(s)).
Cover).
Replacing the Processor Heat-Sink
Replacing the Video-Card Heat-Sink
Replacing the Coin-Cell
Fan).
Fan(s)).
Battery).