40
WARNING:
information that shipped with your computer and follow the steps in
"Before You Begin" on page 9. For additional safety best practices
information, see the Regulatory Compliance Homepage at dell.com/
regulatory_compliance.
Procedure
1
Align the screw hole on the Bluetooth card with the screw hole on the system board.
2
Replace the screw that secures the Bluetooth card to the system board.
3
Connect the Bluetooth-card cable to the connector on the system board.
Postrequsites
1
Replace the palm rest assembly. See "Replacing the Palm Rest Assembly" on page 66.
2
Replace the status light board. See "Replacing the Status Light Board" on page 63.
3
Replace the display assembly. See "Replacing the Display Assembly" on page 60.
4
Replace the power button board. See "Replacing the Power Button Board" on
page 56.
5
Replace the keyboard. See "Replacing the Keyboard" on page 48.
6
Replace the center control cover. See "Replacing the Center Control Cover" on
page 44.
7
Replace the compartment door. See "Replacing the Compartment Door" on page 15.
8
Replace the battery pack. See "Replacing the Battery Pack" on page 13.
9
Follow the instructions in "After Working Inside Your Computer" on page 11.
Replacing the Bluetooth Card
Before working inside your computer, read the safety
Replacing the Bluetooth Card
69
|