Table of Contents
Advertisement
Hard Disk Security Submenu of the Security Menu
The Hard Disk Security submenu is for configuring hard disk security features.
Drive0 Password Is:
Drive1 Password Is:
Set Drive0 Password
Set Drive1 Password
Password Entry on Boot:
F1
ESC
Table 15: Fields, Options and Defaults for the Hard Disk Security Submenu of the Security Menu
Menu Field
Options
Drive0 Password Is:
___
Drive1 Password Is:
___
Set Drive0
___
Password:
Set Drive1
___
Password:
■
Password Entry on
Disabled
Boot:
■
Enabled
Phoenix TrustedCore(tm) Setup Utility
Info
System
Advanced
Hard Disk Security
Clear
Not Available
[Enter]
[Enter]
[Enabled]
Help
Select Item
Exit
Select Menu
Figure 15. Hard Disk Security Submenu
Default
Description
Clear
Display-only. Default is Clear. When the Drive0 Password has been set, the field
changes to Set. When this password is set, the primary hard disk drive cannot be
used in another system unless the password is entered.
Not
Display-only. Default is Not Available. When Drive1 Password has been set, the field
Available
changes to Set. When this password is set, the secondary (modular) hard disk drive
cannot be used in another system unless the password is entered.
[Enter]
Sets, changes or cancels the Drive0 Password. The Drive0 Password may be up to
seven characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. When a Drive0 Password is set, it must be used to
access the hard drive if it is used in another system. Note that the password will not
take effect until the system has been rebooted.
[Enter]
Sets, changes or cancels the Drive1 Password. The Drive1 Password may be up to
seven characters long and must include only letters or numbers (no symbols). Pass-
words are NOT case-sensitive. When a Drive1 Password is set, it must be used to
access the modular hard drive if it is used in another system. Note that the password
will not take effect until the system has been rebooted.
[Enabled]
When set to disabled, entry of a Hard Disk Password is not required before OS boot.
(The hard disk is still password-protected without password entry.)
Security
Boot
-/Space
Change Values
Enter
Select
Sub-Menu
S e c u r i t y M e n u
Exit
Item Specific Help
F9
Setup Defaults
F10
Save and Exit
23
Advertisement
Table of Contents
