D-Link DCS-5020L User Manual page 34

Section 3 - Configuration
Enable the e-mailing
Enabling this will allow snapshots to be e-mailed to you in different ways:
of images to an e-mail
account: • Choosing Always will e-mail snapshots continuously based on the
• Choosing Schedule will allow you to schedule when to start and
• Select Motion/Sound Detection if you would like the camera to
E-mail Interval: This sets the limit for how frequently e-mail notifications will be sent.
This can be set from 1 to 65535 seconds.
Enable the e-mailing of
Enabling this will allow video clips to be e-mailed to you in different
video clips to an e-mail ways. This is the same as e-mailing images, as specified above, but will
account: take video clips according to the Video Limit settings you specify.
Test E-mail Account:
This will send a test e-mail according to the e-mail settings you have
specified above.
D-Link DCS-5020L User Manual
E-mail Interval specified.
stop the e-mailing of snapshots.
e-mail images only when motion or sound is detected. You can
choose whether to e-mail a snapshot immediately, or e-mail 6
snapshots together, with 3 frames before and after motion/sound
was detected. You can also set the Frame interval time to specify
how far apart the snapshots should be.
34 34