Dell 2200MP Safety Instructions page 15

6. Reverse steps 1 through 5 to install the new lamp.
7. Reset the lamp by selecting the left Lamp Reset icon in
the OSD
8. Dell may require that lamps replaced under warranty are
returned to Dell. Otherwise, contact your local waste
disposal agency for the address of the nearest deposit
site.
9. The lamp contains mercury. Disposal of this material may
be regulated due to environmental considerations. For
disposal or recycling information, please contact your
local authorities or the Electronic Industries Alliance:
www.eiae.org.
CAUTION: Do not touch the bulb or the lamp glass at any time. The bulb may explode due to improper handling,
including the touching of the bulb or the lamp glass.
Back to Contents Page
Management tab.