Security Hardware - Dell E6400 - Core 2 Duo Dual-Core Processor Technical Manual

Security

Security Hardware

Fingerprint Reader
FIPS Fingerprint Reader
Trusted Platform Module
(TPM)
Smart Card Reader
Contactless Smart Card
Reader
Dell ControlVault™
Contactless Smart Card Protocols Supported
ISO14443A
®
iCLASS
2
®
MIFARE
3
®
DESFire
®
SmartMX
4
®
Felica
5
NFC
6
A = Card Serial Number (CSN) Read, HID Secure Application Area Read, and Read / Write of All Other Application Areas.
iCLASS specific anti-collision to support multiple cards in the field. HID Secure Application can be used for pre-boot
authentication
B = Read of Card Serial Number (MIFARE: UID, FeliCA: IDm) for pre-boot
communication allowing implementation of
multiple cards in the field.
C= ISO/IEC 14443 Part 4 communication via PC/SC 2.01, raw frame communication, anti-collision to support multiple cards in
the field. CHUID from FIPS-201 PIV-II cards can be used for pre-boot authentication. Includes support for MIFARE/DESFire in
native, wrapped and ISO communication modes.
D = UID read (can be used for pre-boot authentication), raw frame communication, PC/SC 2.01 synchronous card support for
specific chip types, anti-collision to support multiple cards in the field.
E = Ability to act as NFC passive mode initiator at 106 kbits/s and 212 kbts/s
*Sources: HID Global
UPEK TCS3 TouchStrip™ strip sensor with
CMOS active capacitive pixel-sensing
technology
TPM 1.2*
See chart below
ISO14443B ISO14443C
X
X
X
X
X X
both security protocols at application level, MIFARE anti-collision to support
*See important information at end of document
Latitude E6500, E6400, E6400 ATG Technical Guidebook
Latitude E6500, E6400 Reviewer's Guide
1
ISO15693
X
X
X
authentication and via PC/SC 2.01, raw frame
E6500, E6400,
E6400 ATG
Optional on all
Optional on E6500
only
All
All
All
All
Functionality
(see codes below)
A
B
C
C
B
D
72