Lsts-Link Status (D1:F0) - Intel 925 - Pentium D 925 3.0GHz 800MHz 4MB-Cache Socket 775 CPU Datasheet

Host-PCI Express* Graphics Bridge Registers (D1:F0)
8.1.38 LSTS—Link Status (D1:F0)
PCI Device:
Address Offset:
Default Value:
Access:
Size:
This register indicates PCI Express link status.
Bit
15:13
12
11
10
9:4
3:0
140
Access &
Default
Reserved
RO Slot Clock Configuration
1b
0 = The device uses an independent clock irrespective of the presence of a
reference on the connector.
1 = The device uses the same physical reference clock that the platform provides
on the connector.
RO Link Training:
0b
1 = Link training is in progress. Hardware clears this bit once Link training is
complete.
RO Training Error:
0b
1 = This bit is set by hardware upon detection of unsuccessful training of the Link
to the L0 Link state.
RO Negotiated Width: This field indicates negotiated link width. This field is valid
00h only when the link is in the L0, L0s, or L1 states (after link width negotiation is
successfully completed).
00h = Reserved
01h = X1
04h = Reserved
08h = Reserved
10h = X16
All other encodings are reserved.
RO Negotiated Speed: This field indicates negotiated link speed.
1h
1h = 2.5 Gb/s
All other encodings are reserved.
1
B2h
1001h
RO
16 bits
Description
®
Intel 82925X/82925XE MCH Datasheet
R