Integrated Peripherals - Gigabyte GA-870A-UD3 User Manual

2-6

Integrated Peripherals

CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
OnChip SATA Controller
OnChip SATA Type
x OnChip SATA Port4/5 Type
x OnChip SATA RAID5 Support
OnChip SATA3.0 Suuport
x OnChip SATA Port as ESP
Onboard GSATA/IDE Ctrl
Onboard GSATA/IDE Mode
Onboard ESATA controller
Onboard ESATA Mode
Onboard LAN Function
Onboard LAN Boot ROM
 SMART LAN
Onboard Audio Function
Onboard 1394 Function
Onboard USB 3.0 Controller
USB Controllers
USB Legacy Function
USB Storage Function
higf: Move Enter: Select
F5: Previous Values
CMOS Setup Utility-Copyright (C) 1984-2010 Award Software
Onboard Serial Port 1
Onboard Parallel Port
Parallel Port Mode
x ECP Mode Use DMA
higf: Move Enter: Select
F5: Previous Values
OnChip SATA Controller (AMD SB850 South Bridge)
Enables or disables the SATA controller integrated in the AMD SB850 chip. (Default: Enabled)
OnChip SATA Type (AMD SB850 South Bridge, SATA3_0~SATA3_3 connectors)
Configures the operating mode of the integrated SATA3_0~SATA3_3 controller.
Native IDE Allows the SATA controller to operate in Native IDE mode. (Default)
Enable Native IDE mode if you wish to install operating systems that support Native
mode.
RAID Enables RAID for the SATA controller.
AHCI Configures the SATA controllers to AHCI mode. Advanced Host Controller Interface
(AHCI) is an interface specification that allows the storage driver to enable advanced
Serial ATA features such as Native Command Queuing and hot plug.
Integrated Peripherals
[Enabled]
[Native IDE]
IDE
Enabled
[Enabled]
Press Enter
[Enabled]
[IDE]
[Enabled]
[IDE]
[Enabled]
[Disabled]
[Press Enter]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
[Enabled]
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
Integrated Peripherals
[3F8/IRQ4]
[378/IRQ7]
[SPP]
3
+/-/PU/PD: Value F10: Save
F6: Fail-Safe Defaults
- 45 -
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
Item Help
Menu Level 
ESC: Exit F1: General Help
F7: Optimized Defaults
BIOS Setup