Organiser & Tools; Alarms - Sharp 770SH Declaration Of Conformity

Organiser & Tools

Alarms

(M 7-1)
Setting the Alarms
The alarm function allows you to be alerted at a
specified time.
Note that you need to set the current date and time
before setting the alarm function if it has not been done
already.
→
"Organiser & Tools"
1.
Select the blank line (--:--) you wish to set an alarm to.
2.
Enter the desired time.
3.
Press [Save].
To Change the Type of Repeat Options
1.
On the Set Alarm screen, select "Repeat".
2.
Select from "Once Only", "Every Day" or "Selected
Days".
"Once Only": The alarm sounds once only.
"Every Day": The alarm sounds every day at
the specified time.
"Selected Days": The alarm sounds on the selected
day/days of the week at the
specified time.
(M 7)
"Alarms"
To Change the Type of Alarm Tone or Video Clip
File
1.
On the Set Alarm screen, select "Assign Tone/
Video".
2.
Select "Assign Tone" and then select "Preset
Sounds" or "My Sounds", or select "Assign Video".
3.
Select the desired tone or video clip file.
For details on selecting a tone, see "Assigning a
Ringtone for an Incoming Call" on page 112.
To Change the Snooze of the Alarm Tone
1.
On the Set Alarm screen, select "Snooze".
2.
Select the desired snooze option.
To Change the Alarm Volume
1.
On the Set Alarm screen, select "Alarm Volume".
Press a (or d) to increase the volume or press b
2.
(or c) to decrease the volume.
Note
• The alarm will not sound when "Alarm Volume" is
set to "Silent". When the profile is set to "Silent", the
"General Volume" setting (p. 112) has priority.
Organiser & Tools 101