Toshiba D-KVR20U Owner's Manual page 39

3
Use [K / L] to enter the date, then
press [B].
Timer Programming
Date Start
New Program
Date
JAN/02
L1/L2
L1
JAN/01
Daily
MON-SAT
MON-FRI
SAT
FRI
SUN
JAN/31
4
Use [K / L / { / B] or [the Number
buttons] to enter the start and end
time, then press [B].
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
• You cannot make a program whose recording
time exceeds 12 hours.
5
Use [K / L] to select an appropriate
external input (L1/L2) to which your
external tuner is connected, then
press [B].
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
6
Use [K / L] to select a recording media
("DVD" or "VCR"), then press [B].
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
7
Use [K / L] to select a recording
mode.
New Program
Date
JAN/02 12 : 00AM
L1/L2
L1
E9KGBUD_D-KVR20KU_EN.indd 39 E9KGBUD_D-KVR20KU_EN.indd 39
TIMER RECORDING
TUE JAN/01 10:00AM
End L1/L2
Start End
- - : - - - - : - -
REC To Mode
DVD SP
SP 2 : 00
1/1
When pressing [L] at
the current date, the
date will change as
follows.
e.g.) January 1st
Start End
- - : - -
REC To Mode
DVD SP
SP 2 : 00
1/1
Start End
1 : 00AM
REC To Mode
DVD SP
SP 1 : 00
1/1
Start End
1 : 00AM
REC To Mode
DVD SP
SP 1 : 00
1/1
Start End
1 : 00AM
REC To Mode
DVD SP
SP 1 : 00
1/1
Refer to "Recording Mode" on page 33 for DVD
or "Recording" on page 99 for VCR.
• You can check the remaining recordable space
of the disc when you select the recording
mode.
Date Start
JAN/02 12 : 00AM
L1/L2 REC To
L1 DVD
Auto recording mode select (DVD only)...
When "Auto" is selected as a recording mode, the unit
calculates how much time is available on the disc and
determines the appropriate recording mode to
complete recording the program.
New Program
Date Start
JAN/02 12 : 00AM
L1/L2 REC To
L1 DVD
• "Auto" is only available for one program in the timer
program list.
• The recording may be cut short, when the available
recording space of the disc is too limited.
8
Press [ENTER] when all items are
entered.
After displaying a warning message for 10
seconds, timer program list will appear.
Press TIMER SET to Timer Standby mode.
When Timer set on DVD or VCR,
it is not available in the standby mode.
Press TIMER SET to cancel the Standby mode.
Timer Programming
JAN/ 2/08 12:00 AM L1 SP
SP (1:00) TUE JAN/01 10:00AM
Date Start End
JAN/02 12:00AM 1:00AM
Your program setting will be stored.
• To set another program, repeat steps 2 to 7.
• To exit, press [TIMER PROG.] or [SETUP].
• When 2 or more programs are overlapped,
"Timer program overlapped" appears, and the
overlapped program will be displayed in blue.
To correct the timer program refer to
"Checking, canceling, or correcting the timer
programming information" on page 40.
9
Press [TIMER SET] to set a timer
programming.
will appear on the front panel display, while this
unit waits to make the recording.
CS DR
"VCR" will appear on the front panel display
timer recording have been set.
End
1 : 00AM
Mode
SP
SP 1 : 00
End
1 : 00AM
Mode
Auto
Auto 1 : 00
1/1
L1/L2
L1
CD
HDD
DVD
if VCR
EN EN 39 39
2008/05/27 16:10:38 2008/05/27 16:10:38