Honeywell 17007-HD Owner's Manual page 4

Getting Started
LOCATE PRE-FILTER IN THE BOX AND
INSTALL BEFORE INITIAL OPERATION.
Refer to "Removing/Changing the Filters" section for
proper installation.
• Ensure the air purifier is plugged into a working
electrical outlet.
It is recommended you run your air purifier
24 hours a day to ensure continuous cleaning.
Detailed Operation of the Controls
Your True HEPA air purifier features easy-to-use
advanced electronic controls that clearly tell you your
cleaning power level, the status of how dirty the filter
is and whether or not the auto-off timer has been set.
As your filter collects particles and allergens from the
air, the bars in the filter status section will start to fill
up over time. It indicates how much matter is trapped
in the HEPA filter. When the bars are full, the unit will
indicate it is time to check or replace your filter.
NOTE: At first start-up when you initially get the
air purifier and turn it on, or after pressing the
Reset Filter button while the Check HEPA Filter is
illuminated, the status bars will be outlined only.
The Intelli-check™ Filter Indicators will illuminate
when it is time to check or change your filter.
4