Sony Cyber-shot DSC-RX100M2 User Manual page 113

Sets the exposure difference, based on the contrast of the subject.
Select the optimal level between 1.0 EV (weak) and 6.0 EV (strong).
(Exposure
For example, if you set the exposure value to 2.0EV, three images will be
Difference Level)*
composed; –1.0EV, optimal exposure and +1.0EV images.
* The EV number that appears with the
Notes
Since the shutter is released three times for one shot, be careful about the following:
Use this function when the subject is motionless or does not blink
Do not recompose.
You cannot use this function with RAW images.
You cannot start the next shoot until the capture process is completed after you shoot.
You may not obtain a desired effect depending on the luminance difference of a subject and the
shooting conditions.
When the flash is used, this function has little effect.
When the contrast of the scene is low or when significant camera shake or subject blur has
occurred, you may not obtain good HDR images. If the camera detects such situation,
indicated on the recorded image to inform you of this situation. Shoot again, as necessary,
recomposing or paying attention to the blur.
Related Topic
MENU items not available for each shooting mode
Copyright 2013 Sony Corporation
113
mark indicates the current setting value.
is
Back to top