Reset Functions; Osd Warning Messages - Dell E173FP - 17" LCD Monitor User Manual

Reset Functions

Factory Preset Restoration
NOTE: There is no "Undo" when you use the 'Reset function'. To return to the previous function settings, you must adjust
the functions again. 'Reset' will set the clock and phase back to factory settings, activating auto adjust may be required
and this will optimize the image for your system.

OSD Warning Messages

A warning message may appear on the screen indicating that the monitor is out of sync.
Cannot Display This Video Mode
This means that the monitor cannot synchronize with the signal that it is receiving from the computer. Either the signal is too high
or too low for the monitor to use. See
Recommended mode is 1280 X 1024 @ 60Hz.
NOTE: The floating 'Dell - self-test Feature Check' dialog will appear on-screen if the monitor cannot sense a video signal.
Occasionally, no warning message appears, but the screen is blank. This could also indicate that the monitor is not synchronizing
with the computer.
See Troubleshooting for more information.
Back to Contents Page
Specifications for the Horizontal and Vertical frequency ranges addressable by this monitor.
'Exit' leaves this submenu without
resetting any values.
'All Settings' returns your monitor
settings to those that were set at the
time of manufacture. This includes
'Color', 'Position', 'Clock frequency',
'Phase', 'Brightness', 'Contrast' and
'OSD hold time'.