Dell E173FP - 17" LCD Monitor User Manual page 42

Back to Contents Page
Attaching the Cables: Dell™ E173FP Flat Panel Color Monitor
User's Guide
Cable Connections on the Back of the Monitor and the Computer
1. Turn off your computer and unplug its power cable.
2. Connect the blue (analog D-sub) display connector cable to the corresponding video port on the back of your
computer. (The graphic is for illustration only. System appearance may vary).
3. Connect the power cable for your display to the power port on the back of the display.
4. Plug the power cables of your computer and your display into a nearby outlet. Your monitor is equipped with an
automatic power supply for a voltage range from 100 to 240 Volt at a frequency of 50/60 Hz. Be sure that your local
power is within the supported range. If you are unsure, ask your electricity supplier.
5. Turn on your display and computer.
If your monitor displays an image, installation is complete. If it does not display an image, see Troubleshooting.
Back to Contents Page