Table of Contents
Advertisement
2.
The player searches for a network,
and then displays the connection failed
message.
3.
On the bottom of the screen, select
Ip Settings, and then press the v
button.
The IP Settings screen appears.
4.
Select the IP Setting field, and then
press the v button.
5.
Select Enter manually in the IP Setting
field, and then press the v button.
6.
Select a value to enter (Ip Address, for
example), and then press v button.
Use the number keypad on your remote
control to enter the numbers for the
value. You can also enter numbers using
the ▲▼ buttons. Use the ◄► buttons
on the remote control to move from
entry field to entry field within a value.
When done with one value, press the
v button.
7.
Press the ▲ or ▼ button to move
to another value, and then enter the
numbers for that value following the
instructions in Step 6.
8.
Repeat Steps 6 and 7 until you have
filled in all values.
NOTES
✎
` You can get the Network values from your
Internet provider.
9.
When finished, select OK, and then
press the v button. The Security
Screen appears.
10. On the Security screen, enter your
network's Security Code or Pass
Phrase. Enter numbers directly using the
number buttons on your remote control.
Enter letters by selecting a letter with the
▲▼◄► buttons, and then pressing the
v button.
11. When finished, select done at the right
of the screen, and then press the v
button.
The player verifies the network
connection and then connects to the
network.
12. After the player verifies the network,
select OK, and then press the v
button.
WpS(pBC)
Ğ
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press the v
button.
3.
Select Network Settings, and then
press the v button.
4.
Select Wireless in the Network Settings
screen, and then press the v button.
5.
Press the ▲ button on your remote, and
then press the ► button to select the
WpS(pBC).
6.
Press the v button on your remote.
The "Press the PBC button" message
appears.
7.
Press the WPS(PBC) button on your
router within two minutes. Your player
automatically acquires all the network
settings values it needs and connects to
your network.
The Network Status screen appears.
The player connects to the network after
the network connection is verified.
WpS(pIN)
Ğ
Before you begin, open the router's setup
menu on your PC and access the screen with
the WPS PIN entry field.
1.
In the Home screen, select Settings,
and then press the v button.
2.
Select Network, and then press the v
button.
3.
Select Network Settings, and then
press the v button.
4.
Select Wireless in the Network Settings
screen, and then press the v button.
The player searches for and then
displays a list of the available networks.
5.
Select the desired network, and then
press the ► button.
6.
Select the WpS(pIN), and then press
the v button. The PIN pop-up
appears.
7.
Enter the PIN into the WPS PIN entry
field in the router's Set Up screen and
then save the the screen.
NOTES
✎
` Contact the manufacturer of the router for
instructions explaining how to access the
route's Set Up screens or refer to the router's
user's manual.
` For WPS connection, set your wireless router's
security encryption to AES. Setting to WEP
security encryption does not support WPS
connection.
Network Test
Use this menu item to check whether your
network connection is working or not.
Network Status
Use to check whether a connection to a
network and the Internet has been established.
Bd-Live Internet Connection
Set to allow or prohibit an Internet connection
when you use the BD-LIVE service.
• Allow (All) : The Internet connection is
allowed for all BD-LIVE contents.
• Allow (Valid Only) : The Internet
connection is allowed only for BD-LIVE
contents containing a valid certificate.
• prohibit : No Internet connection is allowed
for any BD-LIVE content.
NOTES
✎
` What is a valid certificate?
When the player uses BD-LIVE to send the
disc data and a request to the server to certify
the disc, the server uses the transmitted data
to check if the disc is valid and sends the
certificate back to the player.
` The Internet connection may be restricted
while you are using BD-LIVE contents.
Using Bd-LIVE™
Once the player is connected to the network,
you can enjoy various movie-related service
contents using a BD-LIVE compliant disc.
1.
Attach a USB memory stick to the
USB jack on the front of the player, and
then check its remaining memory. The
memory device must have at least 1GB
of free space to accommodate the BD-
LIVE services.
2.
Insert a Blu-ray Disc that supports BD-
LIVE.
3.
Select an item from various BD-LIVE
service contents provided by the disc
manufacturer.
NOTES
✎
` The way you use BD-LIVE and the provided
contents may differ, depending on the disc
manufacturer.
13
Hide quick links:
Advertisement
Table of Contents
