Samsung UN50F6100AF E-Manual page 15

Series 6100
Table of Contents

Advertisement

Issues
The picture will not display in full
screen.
The remote control does not work.
The cable/set top box remote control
does not turn the TV on or off, or
adjust the volume.
A "Mode Not Supported" message
appears.
Caption on the TV menu is greyed
out.
There is a plastic smell from the TV.
TV Signal Information is unavailable
in the Self Diagnosis Test menu.
TV is tilted to the right or left side.
The Broadcasting menu is greyed
out (unavailable).
Your settings are lost after 30 minutes
or every time the TV is turned off.
You have intermittent loss of audio
or video.
The PIP menu is not available.
You see small particles when you
look closely at the edge of the frame
of the TV.
The POP (the TV's internal banner ad)
appears on the screen.
The message "This file may not be
played properly." appears.
Some functions and pictures shown in this manual are available on specific models only.
To keep your TV in optimum condition, upgrade to the latest firmware on the Samsung web site by USB (Go to samsung.com →
Support).
This TFT LED panel uses a panel consisting of sub pixels which require sophisticated technology to produce. However, there may be
a few bright or dark pixels on the screen. These pixels will have no impact on the performance of the product.
UF6100-ZA_ENG-US.indd 15
Solutions and Explanations
• HD channels will have black bars on either side of the screen when displaying up scaled
SD (4:3) contents.
• Black bars will appear on the top and bottom of the screen when you watch movies that
have aspect ratios different from your TV.
• Adjust the picture size option on your external device or change the TV to full screen.
• Replace the remote control batteries. Make sure you insert them with the plus and minus
ends in the correct direction.
• Clean the transmission window located on the top of the remote control.
• Try pointing the remote control directly at the TV from 5~6 feet away.
• Program the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set
top box user manual for the SAMSUNG TV code.
• Check the supported resolution of the TV and adjust the external device's output resolution
accordingly. Refer to resolution settings in this manual.
• You cannot select Caption in the TV menu when watching content from a device
connected via HDMI or Component.
• Caption must be activated on the external device.
• This smell is normal and will dissipate over time.
• This function is only available for digital channels the TV receives from an Antenna / RF/
Coax connection.
• Remove the stand base from the TV and reassemble it.
• The Broadcasting menu is only available when you select the TV source.
• If TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes.
If you want to change the settings from Store Demo mode to Home Use, press the
SOURCE
button to select TV mode, and go to
• Check the cable connections and reconnect them.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the
cables are flexible enough for long term use. If mounting the TV to the wall, we recommend
using cables with 90 degree connectors.
• PIP functionality is only available when you are using an HDMI or Component source.
• This is part of the product's design and is not a defect.
• Go to
MENU
→ Support → Use Mode, and then select Home Use.
• This may appear because the content has a high bit rate. The content generally will play,
but could experience some playability issues.
English - 15
→ Support → Use Mode.
MENU
2013-03-06
7:25:10

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents