Menu Items - Samsung HG32NB690PF Installation Manual

Menu Items

¦
To Enter this menu: Press the
To exit from this menu : Power Off (or Power Off and unplug if you have changed SI Vendor), and then turn on again. Any
changes you made are saved.
Menu Item
Hospitality
Hospitality Mode
Mode
SI Vendor
SI Vendor
Power On Channel
EN
Power On Channel
Channel Type
Power On Volume
EN
Power On
Power On Volume
Min Volume
Max Volume
Power On Source
Power On Option
Channel Setup
Channel Editor
Channel
Dynamic SI
Picture Menu Lock
Menu OSD
Menu Display
Operation Panel Button Lock
Clock Local Time
→ 1 → 1 → 9 →
MUTE
initial Value
Select the Hospitality mode.
Standalone Standalone mode: TV works alone, without an SI STB or SBB
y
Interactive mode: TV works with an SI STB or SBB
y
Interactive mode : Samsung / OCC / MTI / Nstreams / Enseo / Cardinal /
y
Guestek / Seachange / BDC / Innvne
OFF
Standalone mode : Smoovie
y
Set the default values that will be applied when the TV is turned on.
User Defined : Lets you set Power On Channel and Channel Type manually. See
y
User Defined
Power On Channel and Channel Type below.
Last Saved : If you select this item, when the TV is turned on, it displays the
y
channel it was displaying when it was turned off.
When the TV is turned on, it switches automatically to this channel when in Stand
3
Alone Hospitality mode.
CATV Select channel band : CATV (analog cable band),
y
Set the default volume values which will be applied when the TV is turned on.
User Defined : Lets you set the Power On Volume manually. See Power On
y
Last Saved Volume below.
Last Saved : When the TV is turned on, it returns to the volume that had been set
y
when the power had been turned off.
... TV will switch on at this Volume Level in Stand Alone Hospitality mode.
0 Minimum Volume Level user can set in Stand Alone Hospitality mode.
100 Maximum Volume Level user can set in Stand Alone Hospitality mode.
TV Select the input source the TV displays when it is turned on.
Determines the TV's state when power returns after a power failure or after you have
unplugged the TV and then plugged it in again.
Last Option: Returns to its last Power state. If it was in Stand-by, it returns to
y
Last Option
Stand-by. If it was on, it turns on.
Power ON : When the power returns, the TV turns on.
y
Standby : When the power returns, the TV enters the Standby mode.
y
Gives you direct, immediate access to some of the Channel menu functions on the
user Channel menu such as Auto Program, Antenna selection, etc.
The Channel Editor lets you edit the channels stored in the TV's memory. Using
Channel Editor you can:
– Change the channel numbers and names, and sort the channels in your desired
channel number order.
– Apply the video mute to channels you select. The vido mute blanks out the video from
a channel and outputs only the sound while displaying a speaker icon on the screen.
The Channel Editor also lets you view information about each channel easily, without
your having to display each channel directly.
ON : Check the DTV Program channel number. DTV channel editor is inaccessible.
y
ON
OFF : There is no check of the DTV Program channel number. (DTV channel editor
y
is accessible, but additional channel program number update is not supported)
OFF Enable or disable the Picture Menu.
ON : Main Menu displays.
y
ON
OFF : Main Menu does not display.
y
Turns the front panel (Local key) operations on/off.
Unlock : Unlocks all panel keys
y
Unlock Lock : Locks all panel keys
y
OnlyPower : Locks all panel keys buttons except the Power
y
Menu/Source : Locks Menu and Source
y
Select the way to update clock data.
Manual
Use clock data from a DTV channel to set the clock automatically or set the clock
manually when the TV is in stand-alone mode.
buttons in order.
ENTER
Description
21
English