Connecting The Bathroom Speakers - Samsung HG32NB690PF Installation Manual

You can connect the Bathroom Speakers in the following manner.
Connecting through the Variable Output (available without an external amplifier)
¦
TV Rear Panel
HDMI IN 4 HDMI IN 4
(ARC) (ARC)
DVI AUDIO IN DVI AUDIO IN
AUDIO OUT AUDIO OUT
VOL-CTRL VOL-CTRL VOL-CTRL
VARIABLE VARIABLE VARIABLE
AUDIO OUT AUDIO OUT AUDIO OUT
1. Connect the VARIABLE AUDIO OUT
Speaker +
Speaker -
N/C
2. Connect the VOL-CTRL
✎
The maximum speaker output is 4W, 8Ω.
✎
The VARIABLE AUDIO OUT
y Installing the Volume Control
– If you configure the Volume Control Box as shown in the figure, you can control the volume of the bathroom speakers.
– The jack that connects the Volume Control Box to the TV is a 3.5mm normal Phone jack.
– Volume Control Box switch is a Tact switch.
✎
Setting the Sub AMP Mode
– 0: Turns the Sub AMP function off (PWM off).
– 1: Sets the Sub volume according to the main volume control. That is, the sub volume is determined by the Power On
Volume, the Min Volume, and the Max Volume values set in the Hotel Mode menu.
– 2: Determines the volume according to the bathroom control panel setting.
y Variable Output Port Specifications
– Speaker Wire: Use speaker cable no more than 82 feet (25m) in length.
VOL - UP
VOL - DOWN
( Black /Red 2 )
( White 1 )

Connecting the Bathroom Speakers

COMPONENT COMPONENT
/ AV IN / AV IN
AUDIO OUT AUDIO OUT
port of the TV to the Bathroom Wall Speakers of the hotel.
jack of the TV to the Volume Control Box Switch port on the Bathroom Wall of the hotel.
port supports MONO sound out only.
GND
( Shield Wire 3 )
DIGITAL DIGITAL
(OPTICAL) (OPTICAL)
EX-LINK EX-LINK
1
2
Volume Control Box
VOL +
1
3
2
VOL -
VOL+
Volume Control Box
VOL-
Speaker
English
17