Samsung HG28NB677BF Installation Manual page 20

Menu Item
Eco Solution Energy Saving
Welcome
Message
Edit Welcome
Message
Hospitality
Logo
Logo/
Message
Hospitality
Logo DL
Logo Display
Time
Clone TV to
USB
Clone USB
Cloning
to TV
Setting Auto
Initialize
REACH Server
update Time
REACH
Update
Immediate
REACH Server
Channel
REACH
REACH Server
Server
Version
REACH Server
Group ID
S-LYNK
REACH
S-LYNK
REACH
Volume
IPG Room
Type
TICKER
20
English
[HG670677-ZA]Install Guide-ENG.indd 20
initial Value
Adjusts the brightness of the TV to reduce power consumption.
Off: Turns off the energy saving function.
y
OFF Low: Sets the TV to low energy saving mode.
y
Medium: Sets the TV to medium energy saving mode.
y
High: Sets the TV to high energy saving mode.
y
OFF Displays a the Welcome Message for 5 seconds when the TV turns On. See Page 22.
Edits the Welcome Message.
Turns the Hospitality logo feature On or Off, If On, when the TV is turned on, the Logo is
OFF
displayed, before the signal from the initial source, for the amount of time set in "Logo Display
Time".
Downloads the Hospitality logo.
Hospitality logo file requirements:
BMP or AVI files only.
...
y
Max file size : BMP - 960 X 540. AVI - 30MB.
y
The file can only be named samsung.bmp or samsung.avi.
y
...
Hospitality Logo Display Time (3/5/7 seconds).
Clone the current TV options to a USB memory device.
Clone the saved TV options on a USB memory device to the TV.
If you set Setting Auto Initialize to On, and the TV's power is turned off and on, the guest side
OFF
menu items are restored to their cloned values. See page 30.
Lets you set when data such as updated SW, cloning files, and S-LYNC REACH contents is
downloaded from the REACH server to the TV :
1hour : Every hour
y
2hour : Every 2 hours
1hour y
12:00 am : every 12:00 a.m.
y
12:00 pm : every 12:00 p.m.
y
2:00 pm : every 2:00 p.m.
y
On : Whenever the TV enters standby mode (the power cord is plugged in and the
y
power is off), the REACH data is updated on the TV.
OFF
Off : The REACH data is only updated on the TV at the REACH server update time.
y
Assign a DTV channel number to carry the update REACH data. This channel number must be
87
the same as the number set on the Reach server.
0
Displays the current REACH data version.
All
Select the group ID of the REACH server. (Refer to the REACH server manual for more details)
On : The S-LYNK REACH menu is displayed.
Off
Off : The S-LYNK REACH menu is not displayed.
On : The TV sound of the current TV source is continuously outputted even when the S-LYNK
REACH menu is displayed.
ON
Off : The TV sound of the current TV source is stopped when the S-LYNK REACH menu is
displayed.
Selects the IPG room type of the REACH server. (Refer to the REACH server manual for the more
Default
information.)
On : The TICKER content is displayed.
y
OFF
Off : The TICKER content is not displayed.
y
Description
2013-02-25 2:19:25