internal USB cable
*
Not present on certain computers.
7 Slide the media card reader into the adapter until the tabs on the rails securely click into
position.
8 Connect the internal USB cable to the media card reader
9 Route the USB cable through the cable routing clip.
10 Connect the internal USB cable to the internal USB connector on the system board.
11 Close the computer cover (see page 121).
CD/DVD Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet
before opening the cover.
media card reader*
Removing and Installing Parts
105