Display (Monitor) - HP 100-000 Quick Setup Manual

Power
Symptom
Computer does
not turn off
when the Power
button is
pressed.
Computer shuts
down
automatically.

Display (monitor)

Symptom
Screen is blank,
and monitor power
light is not lit.
Screen is blank.
12 Chapter 5 Troubleshooting
Possible solution
Press and hold the Power button until the computer turns off. Check Power Settings.
●
The computer might be in an exceedingly hot environment. Let it cool down.
●
Ensure that computer air vents are not blocked and that the internal fan is running —
see Cleaning procedures on page 9. (Your computer might not have an internal fan.)
Possible solution
Reconnect the power plug to the back of the monitor and to the wall outlet.
Press the Power button on the monitor.
Press the space bar on the keyboard or move the mouse to make the screen display
visible again.
Press the Sleep button (select models only), or Esc on the keyboard, to resume from
Sleep mode.
Press the Power button to turn on the computer.
Inspect the monitor video connector for bent pins:
●
If any of the pins are bent, replace the monitor connector cable.
●
If no pins are bent, reconnect the monitor connector cable to the computer.
If you have a multi-monitor setup, refer to Setting up multiple displays on page 7.