Elevation And Windage Finger Touch Adjustments (1-6.5X24 Models) - Bushnell ET3124F User Manual

User manual
Table of Contents

Advertisement

ELEvATION AND WINDAGE FINGER TOUCh ADJUSTMENTS (1-6.5x24 MODELS)

1-6.5x24 models of the Bushnell Elite Tactical Riflescope with illuminated reticle feature finger-adjustable, audible-click elevation
and windage adjustments. To adjust the elevation or windage:
1. Remove the covers from the Elevation and Windage Adjustments.
2. Grasp the Adjustment Knob and turn it in the appropriate "UP" (and/or "R") direction indicated by the arrows. Each "click"
will change the bullet impact by .1 mil or approximately .360 inches at 100 yd. One full revolution of the turret will move the
reticle 10 mils.
RESETTING THE ADJUSTMENT SCALE RING
This step is not necessary, but, for future reference, you may want to realign the zero marks on the Adjustment Scale Rings with
the index dots. Simply pull the finger adjustment knob fully to the up position so that it disengages the turret splines- it should
rotate freely without any audible clicks. Then rotate it back to "0" and re-seat so that the knob re-engages.
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Et6245fElite tactical 3-12x44Elite tactical 6-24x50

Table of Contents