Using other external components
To select the method to display the source control screen,
• The operation buttons disappear when no operation is done for about 10 seconds.
• To change settings for video playback,
AV-IN name (
Adjusts the volume.
[
] [–] [+]
[Mode]
Changes the AV-IN name.
• Press [2] or [3] to select an AV-IN name.
[HOME]
Displays the <HOME> screen.
AV-IN
You can connect external components to the LINE IN/
VIDEO IN jacks. (
Installation/Connection Manual)
Preparation:
Select [AV-IN] for <AV Input>. (
• <AV Input> can be changed only when <Input>
in <Navigation Input> is set to [Off].
page 46.
below)
1
Select "AV-IN" as the source.
2
Turn on the connected component and
start playing the source.
page 50)
36
page 10.
(
page 12)