Table of Contents
Advertisement
03
About HDMI
The HDMI connection transfers uncompressed digital video, as well as almost every kind of digital audio.
This receiver incorporates High-Definition Multimedia Interface (HDMI
This receiver supports the functions described below through HDMI connections.
! Digital transfer of uncompressed video (contents protected by HDCP (1080p/24, 1080p/60, etc.))
! 3D signal transfer
! Deep Color signal transfer
! x.v.Color signal transfer
! ARC (Audio Return Channel)
! 4K signal transfer
— This may not operate properly, depending on the connected equipment.
— 4K 24p, 4K 25p and 4K 30p signals are supported.
! Input of multi-channel linear PCM digital audio signals (192 kHz or less) for up to 8 channels
! Input of the following digital audio formats:
— Dolby Digital, Dolby Digital Plus, DTS, High bitrate audio (Dolby TrueHD, DTS-HD Master Audio, DTS-HD
High Resolution Audio), CD, SACD (DSD signal)
! Synchronized operation with components using the Control with HDMI function (see
tion
on
page
69)
Notes
! An HDMI connection can only be made with DVI-equipped components compatible with both DVI and High
Bandwidth Digital Content Protection (HDCP). If you choose to connect to a DVI connector, you will need a
separate adaptor (DVIdHDMI) to do so. A DVI connection, however, does not support audio signals. Consult
your local audio dealer for more information.
! If you connect a component that is not compatible with HDCP, an HDCP ERROR message is displayed on
the front panel display. Some components that are compatible with HDCP still cause this message to be dis-
played, but so long as there is no problem with displaying video this is not a malfunction.
! Depending on the component you have connected, using a DVI connection may result in unreliable signal
transfers.
! This receiver supports SACD, Dolby Digital Plus, Dolby TrueHD and DTS-HD Master Audio. To take advantage
of these formats, however, make sure that the component connected to this receiver also supports the corre-
sponding format.
! Use a High Speed HDMI
®
TM
/
cable. If an HDMI cable other than a High Speed HDMI
not work properly.
! When an HDMI cable with a built-in equalizer is connected, it may not operate properly.
! Signal transfer is only possible when connected to a compatible component.
! HDMI format digital audio transmissions require a longer time to be recognized. Due to this, interruption in the
audio may occur when switching between audio formats or beginning playback.
! Turning on/off the device connected to this unit's HDMI OUT terminal during playback, or disconnecting/con-
necting the HDMI cable during playback, may cause noise or interrupted audio.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered
trademarks of HDMI Licensing, LLC in the United States and other countries.
"x.v.Color" and
are trademarks of Sony Corporation.
Connecting your TV and playback components
®
/
TM
) technology.
Connecting using HDMI
If you have an HDMI or DVI (with HDCP) equipped component (Blu-ray Disc player (BD), etc.), you can connect it
to this receiver using a commercially available HDMI cable.
If the TV and playback components support the Control with HDMI feature, the convenient Control with HDMI
functions can be used (see
Control with HDMI func-
®
TM
/
cable is used, it may
! When connecting to an HDMI/DVI-compatible monitor using the HDMI OUT 2 terminal, switch the HDMI
! For input components, connections other than HDMI connections are also possible (see
31
Control with HDMI function
HDMI/DVI-compatible
Other HDMI/DVI-
Blu-ray Disc player
equipped component
HDMI OUT
HDMI OUT
OUT 3
IN
1
BD IN
IN
2
IN
3
HDMI
(HD ZONE)
(DVD)
(SAT/CBL)
(DVR/BDR)
ASSIGNABLE
1
8
-
SELECTABLE
LAN
(10/100) DC OUTPUT
HDMI
OUT 3
IN
1
BD IN
IN
2
IN
3
IN
4
IN
6
IN
7
IN
8
OUT 2
OUT 1
for WIRELESS LAN
(HD ZONE)
(DVD)
(SAT/CBL)
(DVR/BDR)
(VIDEO)
(CONTROL)
ASSIGNABLE
(OUTPUT 5 V
1
-
8
SELECTABLE
COAXIAL
ASSIGNABLE
OPTICAL
ASSIGNABLE
0.6 A MAX)
IN
1
IN
2
IN
1
IN
2
OUT
(DVD)
(SAT/CBL)
(TV)
(DVR/BDR)
IN
1
(CD)
ASSIGNABLE
output setting to OUT 2 or OUT 1+2. See
Switching the HDMI output
player with no HDMI output
on
page
32).
Connecting your equipment
on
page
69).
This connection is required in
order to listen to the sound of
the TV over the receiver.
HDMI/DVI-compatible
monitor
Select one
HDMI IN
AUDIO OUT
DIGITAL OUT
R
L
ANALOG
COAXIAL OPTICAL
LAN
(10/100) DC OUTPUT
OUT 2
OUT 1
IN
4
IN
6
IN
7
IN
8
(CONTROL)
(VIDEO)
COAXIAL
OPTICAL
ASSIGNABLE
ASSIGNABLE
IN
1
IN
2
IN
1
IN
2
OUT
( DVD )
( SAT/CBL )
( TV )
( DVR/BDR )
( CD )
IN
1
ASSIGNABLE
on
page
80.
Connecting your DVD
for WIRELESS LAN
( OUTPUT 5 V
0.6 A MAX )
Advertisement
Table of Contents
