Changing The Quality Setting ( Quality) - FujiFilm FinePix FinePix S6500fd Owner's Manual

p-MODE MENU (Photography)
Changing the quality setting
( QUALITY)
Use this menu to specify the image size (number of
recorded pixels).
Select the quality setting for the scene being shot.
Z Quality settings in Photography mode
Quality mode
5 F (2848 × 2136)
5 N (2848 × 2136)
% (3024 × 2016)
3 (2048 × 1536)
2 (1600 × 1200)
` (640 × 480)
86
Sample uses
Printing at up to 10R (25.4 × 30.5 cm/
10 × 12 in.) / A4 size
For better quality, select 5 F
Printing at up to 6R (15.2 × 20.3 cm/
6 × 8 in.) / A5 size
Printing at up to 4R (10.2 × 15.2 cm/
4 × 6 in.) / A6 size
To use for e-mail or web site
Area shot and quality setting
Area shot excluding %
N 25 25 N 25 25
ISO 100 ISO 100 ISO 100
8/ 24 24/ 2006 8/ 24 24/ 2006 2006 10 10: 00 00 AM 2006 10 10: 00 00 AM AM AM
60 60 F2 F2. 8
Normal shooting provides an aspect ratio of 4:3 and %
shooting provides an aspect ratio of 3:2 (same aspect ratio as
35 mm film and post card).
MEMO
• The bigger the number of recorded pixels, the better the
image quality becomes. As the number of recorded
pixels becomes smaller, you will be able to record more
frames to an xD-Picture Card.
• The quality setting is retained even when the camera is
turned off or the mode setting is changed.
• When changing the quality setting, the number of
available frames also changes (➝p.179). The numbers
to the right of setting show the number of available
frames.
CAUTION
Quality cannot be selected when setting CCD-RAW
(➝p.128).
Setting the menu (➝p.81)
Area shot with %
25 25 25 25
ISO 100 ISO 100 ISO 100
8/ 24 24/ 2006 8/ 24 24/ 2006 2006 10 10: 00 00 AM 2006 10 10: 00 00 AM AM AM
60 60 F2 F2. 8