Focus Check - FujiFilm FinePix FinePix S6500fd Owner's Manual

U SET-UP
CCD-RAW
Setting CCD-RAW to ON disables the signal
processing functions (reconstituting the data received
from the CCD as an image) performed on the camera.
Consequently, this task must be performed on the PC.
Use the bundled FinePixViewer software to perform the
processing on a PC. Conversion using FinePixViewer
also provides a simple way to create TIFF-format images.
(Convertible file type will differ depending on your PC. For
details, refer to the online help of FinePixViewer.)
CAUTION
• The functions listed below cannot be used in CCD-RAW
mode.
- During shooting
Digital zoom, Continuous shooting, Quality and Post
shot assist window are unavailable.
- During playback
Playback can be zoomed up to 2.5×, but cropped
images cannot be saved.
• You cannot take a picture when CCD-RAW is set and
the internal memory is used.
CHECK
To rebuild images, FinePixViewer (on the bundled CD-
ROM "Software for FinePix CX") must be installed on your
PC.
128
How to use the SET-UP menu (➝p.122)

FOCUS CHECK

Use this function when it is difficult to see whether the
image is focused.
8/ 24 24/ 2006 8/ 24 24/ 2006
60 60 F2 F2. 8
Set FOCUS CHECK to ON. The center of the image can
be zoomed in by turning the focus ring, and focusing can
be more easily achieved in this portion of the screen.
Take the picture to return to normal display.
CAUTION
• Focus check function can be used in the MF mode
(➝p.72).
• Focus check function is disabled when setting the
High-speed shooting mode (➝p.92) or setting
EVF/LCD MODE (➝p.123) to "60 fps" in the
USET-UP menu.
N 25 25 N 25 25
ISO 400 ISO 400 ISO 400 ISO 400
2006 10 10: 00 00 AM 2006 10 10: 00 00 AM AM AM