FujiFilm FinePix A800 Owner's Manual page 125

Fujifilm digital camera finepix a610/finepix a800 owner's manual
Hide thumbs Also See for FinePix A800:
Table of Contents

Advertisement

Warning Displayed
• The Memory Card contact area is soiled.
• The Memory Card format is incorrect.
CARD ERROR
• Camera fault.
• The Memory Card is damaged.
• Inserted Memory Card is not compatible with your
camera.
\ MEMORY FULL
The internal memory or Memory Card is full.
Y MEMORY FULL
• The data could not be recorded due to a Memory
Card error or a connection error between the
Memory Card and camera.
WRITE ERROR
• The image cannot be recorded as it is too large to
fit in the available space on the Memory Card.
• The Memory Card or internal memory is not
formatted.
The SD Memory Card switch is slide to the "Lock"
PROTECTED CARD
side.
INTERNAL MEMORY IS
The data could not be recorded or copied since the
FULL
internal memory is full.
INSERT A NEW CARD
The timing for recording was incorrect because the
BUSY
Memory Card was formatted on a PC.
The frame number has reached 999-9999.
FRAME NO. FULL
Explanation
Remedy
• Wipe the contact area on the Memory Card with a
soft, dry cloth. It may be necessary to format the
Memory Card (➝p.89). If the message still
appears, replace the Memory Card.
• Contact your FUJIFILM dealer.
• Insert a compatible Memory Card that is operation-
checked at FUJIFILM Corporation (➝p.19).
Erase some images in internal memory or Memory
Card (➝p.38), or use a Memory Card that has ample
free space.
• Re-insert the Memory Card or turn the camera off
and then on again. If the message still appears,
contact your FUJIFILM dealer.
• Use a new Memory Card.
• Format the Memory Card or internal memory on
the camera (➝p.89).
Unlock the protection by sliding it back (➝p.20).
Erase some images from the internal memory
(➝p.38), or use a Memory Card that has ample free
space.
Use a Memory Card that was formatted on the
camera.
A Insert a formatted Memory Card into the camera.
B Set RENEW as the FRAME NO. setting in the
SET-UP menu (➝p.86).
C Start taking pictures (The frame number starts
from "100-0001").
D Set CONT. as the FRAME NO. setting in the
SET-UP menu.
Continued Q
125

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents