Connecting To A Pc - FujiFilm FinePix A800 Owner's Manual

Connecting to a PC

By connecting the camera to a PC, your system can be
expanded to fill a wide range of uses. Using
"FinePixViewer" performs images saving, browsing and
file management etc.
MEMO
If the power cuts out during data transmission, the data
will not be transmitted correctly. Always use the AC power
adapter when connecting the camera to a PC.
Refer to Software
Installation (➝p.100, 103)
the first time you connect
the camera to your PC.
Install the software first. Do
not connect the camera to
the PC before installing all
the software.
A Insert the Memory Card with images into the camera
(➝p.19).
You can use the xD-Picture Card and the SD
Memory Card with the FinePix A610 and FinePix
A800. In this Owner's Manual, these cards are
expressed as "Memory Card".
106
CD-ROM
(Software for FinePix)
CAUTION
• Do not format the Memory Card in the camera on the
PC.
• Use the Memory Card with images taken by a
FUJIFILM Digital camera.
• When connecting to a PC, if the Memory Card contains
large image or movie files, connection or transmission
may take time or images may not be stored. In these
cases, use the Image Memory Card Reader (sold
separately), etc. Note that the Image Memory Card
Reader DPC-R1 is not compatible with the SD Memory
Card.
B Connect the camera to your PC using the USB cable
(mini-B).
(mini-B)
C Press w for about 1 second to turn the camera on in
Playback mode.
USB socket
AC-3VX
(sold separately)