Removing A Sim - HP Mini 2102 User Manual

6. Remove the battery.
NOTE:
this guide.
7. Insert the SIM into the SIM slot, and gently push the SIM into the slot until it is firmly seated.
8. Replace the battery.
NOTE:
9. Reconnect external power.
10. Reconnect external devices.
11. Turn on the computer.

Removing a SIM

To remove a SIM:
1. Shut down the computer. If you are not sure whether the computer is off or in Hibernation, turn the
computer on by pressing the power button. Then shut down the computer through the operating
system.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery.
NOTE:
this guide.
32 Chapter 4 Internet
For more information, refer to the section "Inserting and removing the battery," earlier in
HP Mobile Broadband will be disabled if the battery is not replaced.
For more information, refer to the section "Inserting and removing the battery," earlier in