Table of Contents
Advertisement
Speakers
Description
Speaker Kit (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
●
Optical drive (see
●
Keyboard (see
●
Top cover (see
●
USB board (see
Remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
Release the speaker cables from the clips (2) built into the base enclosure.
3.
Remove the Phillips PM2.5×9.0 screw (3) and the three Phillips PM2.5×6.0 screws (4) that secure
the speakers to the computer.
Battery on page
43), and then remove the following components:
Optical drive (select models only) on page
Keyboard on page
53)
Top cover on page
56)
USB board on page
62)
Spare part number
647315-001
44)
Component replacement procedures
65
Advertisement
Table of Contents
