Table of Contents
Advertisement
3.
Remove the battery (3) from the computer.
To insert the battery:
1.
Align the tabs on the rear edge of the battery with the notches on the rear edge of the battery bay.
2.
Pivot the front edge of the battery down into the battery bay until it is seated. (The battery release
latch will automatically lock into place.)
Optical drive (select models only)
NOTE:
The optical drive spare part kit includes a bezel and bracket.
Description
Blu-ray Disc ROM with SuperMulti DVD±R/RW Double-Layer Drive with LightScribe
DVD±RW and CD-RW Super Multi Double-Layer Combo Drive with LightScribe
Before removing the optical drive, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
44
Chapter 4 Removal and replacement procedures
Battery on page
43).
Spare part number
646127-001
646126-001
Advertisement
Table of Contents
