A Dvd Movie Is Not Visible On An External Display; The Process Of Burning A Disc Does Not Begin, Or It Stops Before Completion; A Dvd Playing In Windows Media Player Produces No Sound Or Display - HP HDX X16-1000 - Premium Notebook PC User Manual

A DVD movie is not visible on an external display

1. If both the computer display and an external display are turned on, press
to switch between the 2 displays.
2. Configure the monitor settings to make the external display primary:
a. Right-click on a blank area of the computer desktop, and select Personalize > Display
Settings.
b. Specify a primary display and a secondary display.
NOTE:
the secondary display.
To get information about a multimedia question not covered in this guide, select to Start > Help and
Support.
The process of burning a disc does not begin, or it stops
before completion
●
Be sure that all other programs are closed.
●
Turn off Sleep mode and Hibernation.
●
Be sure that you are using the right kind of disc for your drive. See your user guides for more
information about disc types.
●
Be sure that the disc is inserted properly.
●
Select a slower write speed and try again.
●
If you are copying a disc, save the information on the source disc to your hard drive before trying
to burn the contents to a new disc, and then burn from your hard drive.
●
Reinstall the disc-burning device driver located in the DVD/CD-ROM drives category in Device
Manager.
A DVD playing in Windows Media Player produces no
sound or display
Use MediaSmart to play a DVD. MediaSmart is installed on the computer and is also available from the
HP Web site at http://www.hp.com.
When using both displays, the DVD image will not appear on any display designated as
A DVD movie is not visible on an external display
fn+f4 one or more times
33