Device Problems - Dell P703w All In One Photo Printer User Manual

SSID is not visible from the list of available networks.
The SSID is not visible from the list of available network. It could be out of sight at the bottom of the list.
Ensure that the network name (SSID) is correct.
Ensure that you have entered the correct network name (SSID) in the Wireless Setup wizard.
NOTE: SSID is case-sensitive.
Ensure the correct WEP key is used.
When connected to a WEP security mode, ensure that you have entered the correct WEP key. If you do not know the WEP key, see the user guide for the
wireless router.
Wireless adapter in computer is not broadcasting SSID.
If the wireless adapter in the computer is not broadcasting the SSID (ad hoc):
1. Verify that the wireless adapter is broadcasting the SSID.
2. Print a Network Configuration Settings page from the printer using the following steps and verify that the SSID for the wireless adapter appears on the
Network Configuration Settings. If the wireless adapter is not broadcasting the SSID, verify Wireless Network set-up on the computer.
3. Check the Network Status. For more information, see
Wireless adapter on computer is not broadcasting the SSID.
Wireless adapter in the computer is not broadcasting the SSID (ad hoc).
1. Verify that the computer is setup for ad hoc mode and the network name (SSID) is correct.
2. Print a network configuration setting page from the printer. For more information, see
3. Verify that the SSID for the wireless adapter appears on the Network Configuration Settings page. If the wireless adapter is not broadcasting the
SSID, verify wireless network set up on the computer.

Device Problems

Ensure that the camera is turned on.
Ensure that the USB cable from the camera is fully inserted in the USB connector.
Ensure that the memory card is completely inserted.
Ensure that the type of memory card you are using can be used in the printer.
For more information, see Printing From a Memory Card or USB
Insert only one memory card at a time.
When printing images from a memory card, ensure that the file format of the images is supported by the printer.
Only images in JPG and a limited set of TIFF formats can be printed directly from the memory card. If you want to print photos stored on the memory card in
a different file format, the photos must be transferred to your computer before printing.
If the memory card file system is corrupt, reformat it in your camera.
Ensure that the printer is not connected to a PictBridge-enabled camera.
For more information, see Printing Photos From a PictBridge-Enabled
Ensure that the device is within range of the Bluetooth radio signal (30 feet or 10 meters).
Ensure that the Bluetooth technology enabled device uses a BIP, OPP, or FTP profile.
Ensure that you enter a PIN of 1111 into the sending device.
Check the Network Status.
Key.
Camera.
Check that you are connected to correct network.