HOTSPOT SETUP GUIDE
LASERJET PRO M1210 SERIES
A hotspot-enabled product has the ability to provide wireless Internet access for your computer, smart phone, or tablet.
This product supports the following types of connections:
PPPoE (Point-to-Point Protocol over Ethernet)
Note: This product does not support bridge or
Dynamic or Static IP address with router
Scan the QR code to download
HP mobile apps.
© 2012 Hewlett-Packard Development Company, L.P.
Before continuing with this procedure, set up the product first by following the
You have three options to set up the hotspot feature.
Option 1: Configure hotspot at software installation
After having installed the printer driver, select the option
to Enable Hotspot & Direct Print, and then click Next.
Select one of the Security Mode options, and then
click Next. The options include:
maximum security (recommended)
no security (not recommended)
You also have the option to set up a custom SSID.
Connect the product to a computer with the USB
cable, and then click Next.
Select the option that indicates how you connect to
the Internet, and then click Next.
If you selected PPPoE or Static IP, fill in the
appropriate information, and then click Next.
(This procedure is continued on the next page.)